TLS-ZR GD2 / TLS-ZL GD2 Solenoid Interlock Switch The TLS-ZR GD2 and TLS-ZL GD2 are additions to the existing TLS GD2 range of guard locking switches. The TLSZR GD2 is a power-to-release and the TLS-ZL GD2 is a power-to-lock unit. They may be used as part of a guard locking system to achieve performance Level "e" to EN/ISO 13849‐1. They are certified by the TÜV as meeting EN/ISO 13849-1. In mechanical configuration they are identical to the existing TLS-GD2 range with the exception that they include an additional RFID door target which is mounted close coupled with the supplied fully-flexible actuator. These switches have built in microprocessor technology and have two channel OSSD solid-state outputs. Locking/unlocking is achieved using a logic level signal input. The RFID door target is uniquely coded and provides the internal microprocessor with additional door position information. Therefore, in the event of a broken or missing actuator key the microprocessor will shut down the OSSD safety outputs. This extra functionality enables performance level "e" to EN/ISO 13849-1 to be reached as there is no reliance on fault exclusion for a broken or missing actuator key. The TLS-GD2 range are positive mode, tongue operated, guard locking interlock switches that can lock a machine guard closed until power is isolated and ensure that it remains isolated while the guard is open. The TLS-ZR GD2 and TLS-ZL GD2 head has two entry slots and it can be rotated to provide three actuator entry points. A blanking plug is provided to seal the unused slot. The TLS-ZR GD2 is a power-to-release switch, the guard may only be opened when a logic signal is applied to the switch after which the internal microprocessor will enable the internal solenoid, which releases the lock mechanism. The TLS-ZL GD2 is a power-to-lock switch, the guard will be locked when a logic signal is...

Allen Bradley Guardmaster Solenoid Interlock Switch, 114mm Width - 442G-MABH-R Protect your equipment and appliances with this solenoid interlock switch from Rockwell Automation's Allen Bradley range. It's used as a safety device to prevent access to machines when they are running. This lock has dimensions of 113.5 (depth) by 289.3 (length) by 114mm (width), making it a compact solution for safeguarding heavy equipment. The component is mounted on the right-hand guard and has four controls that can be customised for different functions. A holding force of 2000N makes this a suitable choice for doors and heavy-duty machinery. • IP65 (ingress protection) rating means it's dust-tight and protected against water jets• Radio frequency identification (RFID) capabilities for easy identification and entry tracking• Four light-emitting diodes (LEDs) show system information to enable swift diagnosis and repairs• Optional escape release that allows anyone mistakenly locked in the protected area to exit easily for optimal safety Standards and Certifications • RoHS (Restriction of Hazardous Substances) Handle Assembly, 442G Access Box, Right-Hinged Door, with Bolt Locking Mechanism How can I increase the security of this lock? You can increase the lock's security by attaching padlocks onto one of the two integrated hasps.

Allen Bradley Guardmaster - Ferrogard 1, 2, 20 & 21 Non Contact Safety Switch Secure your machine guards and improve safety for personnel with the Ferrogard FRS 1, 2, 20 and 21 Non-Contact Safety Switches by Allen Bradley Guardmaster. These innovative magnetically actuated non-contact safety switches are expertly designed to be installed on guard doors where they limit access to hazardous areas, preventing risk of injury to operators. When the magnetic actuator is withdrawn from the switch the NC safety contacts are opened, which isolates power to the machine. Ferrogard safety switches provide the reliability of non-contact switches combined with a high tolerance to door misalignment due to their large sensing field. They have simplified set-up and alignment to help decrease installation costs. They also have internal non-resettable overload protection on the safety contact and protected safety contacts. Risk of debris contamination is reduced due to no contact between the sensor and actuator. The FRS 1, 2, 20 and 21 devices are made from moulded ABS with a rectangular housing for flexible mounting options, and are sealed to IP67 (NEMA 6P), which makes them dust-tight and highly suitable for use in wet environments. Allen Bradley Guardmaster have a huge range of machine monitoring and safety devices to meet all your application requirements. Their products are cost-effective, high-quality, and built to global standards to help keep your operations running smoothly, protect your personnel, and optimise productivity. Features and Benefits: • Non-contact actuation to allow instant opening of the guard door• High tolerance to misalignment• Plastic rectangular housing• Cable or quick-disconnect (QD) connections• M4 mountable in any position• Operating distance for safety contacts - make;12mm, break;23mm• Operating temperature range: -10°C to +65°C• Sealed to IP67• Cat. 1 device per EN 954-1 dual channel interlocks suitable for Cat. 3 or 4 systems What are the advantages of non-contact safety switches? Non-contact safety switches are highly reliable and durable. They take less wear and tear and are low-maintenance, as well as resistant to shocks and vibrations. They cannot be easily manipulated or tampered with and are ideal for use with machine guards and doors to restrict access to unsafe areas. They are often used in industrial environments, such as in factory production lines. Allen Bradley Guardmaster are experts in machine safety devices and have an exceptional range to help you find your ideal solution. Approvals CE Marked for all applicable directives and cULus. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Allen Bradley Guardmaster 440K-C21098 Cadet 3 Safety Interlock Switch Ensure superior guard interlocking for small machine safety barriers and protect personnel from entering hazardous areas with the 440K-C21098 Cadet 3 Tongue Interlock Switch by Allen Bradley Guardmaster. This Cadet 3 interlock unit features a rotatable head with 2 entry slots, allowing up to 8 different actuator entry points for greater application flexibility. This unique switch has compact housing, making it highly versatile, and has industry standard fixing centers for effortless mounting. To operate the switch, the specially profiled key must be fixed to the machine guard door. This can then be inserted into the switch. The 440K-C21098 safety switch has 2NC safety contacts, 1NO auxiliary contact, and break-before-make action. It comes with tough stainless-steel flat type actuator and has M16 conduit entry. The housing is red for easy visibility and is made of resilient UL approved glass-filled PBT. It is dust-proof and water-tight, giving it a high ingress protection rating of IP67. It has a voltage rating of 600VAC/DC. The Cadet 3 interlock switch is designed specifically to be fitted at the leading edge of hinged, sliding, and lift-off machine guard doors and provides superior protection for equipment and personnel. Features and Benefits: • Dual entry rotatable head which offers 8 actuator entry positions• IP67 rated, making it ideally suited for wash-down environments• Compact size, perfect for small lightweight guards• Easy installation to save you valuable time• Industry standard fixing centres to DIN 500, ensuring ease-of-mounting• GD2 style available for harsher applications Note: A blanking plug is supplied for the unused key entry.This device can be used with GuardLink, a new linking technology from Allen Bradley Guardmaster. GuardLink simplifies and reduces the connection time of the safety system while providing real-time diagnostic information over Ethernet IP. This simplifies the identification of the location of the device that has tripped the system. Thus, it reduces downtime and improves the overall efficiency of the machines. For more details, please refer to the GuardLink brochure. Certifications: EN954-1ISO13849-1IEC/EN60204-1NFPA79EN1088ISO14119IEC/ EN60947-5-1ANSI B11.19AS4024.1 CE certified TUV certified CCC certifiedUL approved How does a Safety Interlock Switch work? Safety interlock switches work by securely locking guard doors and gates, preventing unsafe access to hazardous areas where machinery may be in operation. This helps to decrease the risk of injury to personnel and damage to machinery. They can also be used to monitor the status of the machine guard, and to ensure that machinery cannot start up or run while the guard door is open. They are often utilised in industrial applications, such as safeguarding factory production lines. They can vary in lock type, maximum current and voltage, and housing material. These interlock switches are specifically designed to meet high standards of protection. Rockwell Automation is a global leader in industrial automation and digital transformation, and brings smart manufacturing to life. With a long legacy of creating Allen-Bradley® integrated control and information solutions, we help make you as productive as possible. Our portfolio of sensing, safety and motor control products can support your move towards smart machine applications. Allen-Bradley® IO-Link sensors are data-enabled and communicate with all field buses, providing diagnostic and health information about the device before a machine stops, and enabling quick production changeovers through fast parameter downloads from PLCs into the device. This reduces machine downtime and increases manufacturing OEE. For safety components, products with built-in diagnostics simplify the set-up of the smart device, and reduce maintenance, leading to a more efficient, machine data-driven approach.

194R Disconnect Switch Accessories, Extension shaft, 12 in operating shaft length

IEC Control and Load Switch Actuator, Type A, Gray/Black, 48mm x 48mm, Legend Text: 1-0-2 (45°), European Product Offering

Allen Bradley Guardmaster Rope Pull Switch, 200mA Current, 100m Length - 440E-LL5SS5 Quickly halt your industrial equipment in the event of an emergency using this rope pull switch from Rockwell Automation's Allen Bradley Guardmaster range. It's 100m long, making it suitable for complex machinery such as conveyor systems. To activate the switch, simply grab and pull it to stop the device. Thanks to its corrosion-resistant stainless steel housing, you can safely use it in hygienic environments. For added safety, it comes with an emergency stop push button. A built-in reset button means returning the unit to its resting state is quick and simple. • Rope status indicator for quick configuration• IP66 rating means it's dustproof and protected against high-pressure water jets• Integrated spring provides tension relief to protect the rope from wear• Wide operating temperature range between -20°C and +75°C to withstand harsh environments• Tension indicator for easy monitoring of rope tension level during setup Standards and Certifications • ISO 850• PLe Cat 4• EN ISO 13850• IEC 60947-5-5• CE Marked 440E Lifeline Emergency Cable Pull Switches - Lifeline 5 Stainless Steel housing without E-stop, 2 OSSD Outputs, 1 Aux Output. How fast does this rope pull switch stop a machine? It has a fast response time of 60ms, so it's a reliable way to prevent hazards in your industrial environment.

Rotacam Pneumatic Safety Switch Hinge-operated safety switch designed for interlocking hinged guard doors and access flapsMay be mounted in any direction in any position. The bored stainless steel operating shaft is mounted in a sealed bearing which is sufficiently robust to enable switch itself to be used as the hinge if necessaryFor use on pneumatic machinery - unit gives positive acting isolation of a machine’s compressed air supplyIncorporates push-in fittings for direct connection to 4mm Ø nylon tube (internal diameter 2.5mm)Maximum pressure 8 barTemperature range -10°C to + 60°C

Our Access/Chains Trapped Key Interlock Switches allow access to hazardous areas only when an appropriate key is inserted into the interlock. These stainless steel access interlocks provide a rugged, industrial grade method of helping prevent access through gates. They are actuated by either a lever or a rod that is connected to chain. 316L stainless steel constructionDirect drive operationFitted with tamper resistant screwsStainless steel dust capReplaceable code barrel assemblyMechanical or electrical switch typesMultiple key options

Our Bulletin 800Z Zero-Force Touch Buttons™ are designed for machine control systems that require the use of two hands. An interlinked sensor surface weaves two capacitive sensors in offset planes for superior product sensitivity. When you touch the surface of the switch, you initiate an output. Our buttons can detect a hand through most industrial gloves. The contour of the touch buttons easily conforms to the shape of the hand while helping prevent defeatability when two-hand control is needed Internationally rated ergonomic touch buttonsZero force to operateEMC protectionDiagnostic LEDsReplaceable relays (heavy industrial design) Plastic Mounting Kit for 22.5mm Holes, (GP)

Allen Bradley Guardmaster Sensaguard 440N RFID Cylindrical Non-Contact Safety Switch Optimise your guard door and improve machine safety with the Sensaguard 440N RFID Cylindrical Non-Contact Safety Switches by Allen Bradley Guardmaster. These switches ensure a superior level of security and protection to reduce risk of injury, damage to equipment, and overall downtime. The Sensaguard safety switches feature advanced latest generation Radio Frequency Identification technology for coding and inductive technology for sensing, which makes them highly reliable and tamper-resistant. These switches are designed to be installed on machine guard doors, offer tolerance to door misalignment, and have a large sensing range. These versatile switches can meet a broad range of industrial applications. These safety interlock switches can be connected standard safety relays, SmartGuards and safety I/O blocks to suit your needs. They also maintain PLe, SIL 3, Cat 4 rating even with multiple units connected in series. They have a high IP69K rating, which ensures that they can withstand powerful jets of water and are fully protected against dust ingress. The Sensaguard switches are a cost-effective solution and are perfectly suited for use with sliding, hinged, and lift-off machine guard doors. Features and Benefits: • 3 x PNP outputs (including 1 auxiliary)• Excellent IP69K environmental protection rating• Highly tamper-proof due to secure RFID sensing• No dedicated controller is required• LED indication for door status and fast troubleshooting• Can be connected in series with other safety components (light curtain, E-stops, key interlock switches)• Superior reliability due to short-circuit and over-voltage protection• Uses the standard proximity brackets• Multiple sensing directions offers greater flexibility Note: Supplied with actuator. Stainless steel version is suitable for use in harsh environments. Standards: IEC60947-5-3, IEC 61508, EN954

Allen Bradley Guardmaster Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch Enhance the safety and security of your machine guards and provide essential protection for personnel with the Ferrogard FRS, 6 9 and 10 by Allen Bradley Guardmaster. These magnetically actuated non-contact safety switches are specially designed to be installed on guard doors and work by immediately cutting off the power supply to a machine when the safety guard or gate is opened, thereby restricting unsafe access for personnel to a hazardous area. The magnetic actuator is removed from the switch when the door is released, which then opens the NC safety contacts. They offer reliability and a high tolerance to misalignment due to their large sensing field. These switches are dust-tight and are highly suitable for wet environments as they are sealed to IP67 (NEMA 6P). With two active sensing faces, they offer a wider range of mounting options for your convenience. This switch is moulded in ABS plastic with a slim rectangular housing, making it perfect for narrow mounting areas. Features and Benefits: • Slim housings, well suited to narrow mounting areas and two active sensing faces permitting more flexible mounting options• Non-contact actuation, which allows the machine guard to be opened immediately• Operating distance for safety contacts: make 12mm; break 23mm• Operating temperature range: -10°C to +65°C• M4 mounting• Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals: CE Marked for all applicable directives and cULus, UL, CSA Standards: EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.